two sided box top

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: sbk, al wolford

two sided box top

Postby gpeck » Sun Aug 13, 2017 6:39 pm

in order to cut a box top for a box shaped like an apple, i need to have the top layer match up with the lower layer grove that fits in the box. when i tool path my index holes on the top and then mirror them horizontaly on the spoilboard the holes do not match. they are off by about .04.. what may i have done wrong>>>>>>??????
gpeck
 
Posts: 160
Joined: Fri Sep 06, 2013 1:35 pm

Re: two sided box top

Postby tonydude » Mon Aug 14, 2017 6:13 am

Have you watched the tutorials http://support.vectric.com/tutorials/V9 ... ideo_id=51 and other related ones? What program are you using vcarve pro or aspire?

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 8.511, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1418
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: two sided box top

Postby gpeck » Mon Aug 14, 2017 4:07 pm

I am useing vcarave pro 8.5.. Does it matter where the index holes are out put on the spoilboard as long as they are a copy of the top?? thanks for any info.. Looks like 9v has some good things in it.
gpeck
 
Posts: 160
Joined: Fri Sep 06, 2013 1:35 pm

Re: two sided box top

Postby KevinO » Mon Sep 25, 2017 3:19 pm

gpeck,
You have to make sure that your index holes are symmetrical around x=0, y-o. Otherwise, your top and bottom patterns will not line up properly.
Regards,
Kevin
KevinO
 
Posts: 63
Joined: Mon Feb 27, 2012 7:25 pm
Location: Long Island, New York


Return to Software. Programming

Who is online

Users browsing this forum: No registered users and 2 guests