Importing images and DWG / DXF files into cutting software

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: sbk, al wolford

Importing images and DWG / DXF files into cutting software

Postby danontoast » Fri Jun 22, 2012 5:16 pm

Hi all,

I have some questions about the CNC Shark Pro Plus Routing System which i am thinking of getting.

I already use AutoCAD for my real work (architecture and 3d modelling) - can I make 3d models in autocad and create cutting projects from those. Maybe import them into the software you provide for the cutting? This would make it much easier than learning a new piece of software. Can it import DWG or DXF or 3DSmax models?

How loud is the machine in dB?

How long would it take to cut simple 12"x12" letters. No bevelled edges or anything fancy, just a 1ft x 1ft 'H' or 'A' straight cut letter in a standard times roman or arial font from 1/2" wood. I read a lot about people carving for 10hrs but my wife likes these carved letters as simple decoration on the mantel and that would be a fun gift to start of with.

Finally, is there a way to also import photoshop or other image formats into the software. I know this will not include any depth of cut, but could that be added in the cutting software you provide. I am thinking of doing a silhouette of my nieces/nephews faces for presents if i can get a good profile photo.

Thanks, Dan
danontoast
 
Posts: 3
Joined: Fri Jun 22, 2012 3:41 pm

Re: Importing images and DWG / DXF files into cutting softwa

Postby Loudspeakerboy » Sat Jun 23, 2012 7:57 am

Hi Dan

I'm not very wordy, so here are some short answers..

I do all of my drawing on my Mac and then export as a DXF file. I find this to be much faster than drawing in Vcarve.

The CNC machine is probabley under 70db, it's the router that makes the racket. Depending on feed rate and bit type you can easily hit 100db.

To do a letter as described.. About 10 minutes depending on material..

I can't respond to you last question as I use my shark for building acoustic guitars and making tools to build same..

Hope this helps a little. Cheers, Michael
Loudspeakerboy
 
Posts: 106
Joined: Fri Sep 23, 2011 3:54 pm

Re: Importing images and DWG / DXF files into cutting softwa

Postby Loudspeakerboy » Sat Jun 23, 2012 8:03 am

PS

Doing lettering in Vcarve is a breaze. I have had to import fonts, but that's normal.
Loudspeakerboy
 
Posts: 106
Joined: Fri Sep 23, 2011 3:54 pm

Re: Importing images and DWG / DXF files into cutting softwa

Postby FixitMike » Sun Jun 24, 2012 2:14 am

You can edit a photo with Paint, and then save as a bitmap. You can then import the bitmap file into Vcarve. Vcarve can turn a bitmap into vectors for carving, although I've found it faster to trace the imported bitmap for the few times I've done it.
FixitMike
 
Posts: 120
Joined: Sat Mar 26, 2011 1:16 pm
Location: Renton, WA

Re: Importing images and DWG / DXF files into cutting softwa

Postby danontoast » Tue Jun 26, 2012 12:46 pm

thanks for all the replies...it seems like i can use autoCAD and photoshop easily enough which is a big relief.

I had questions about the way the CNC actually cuts but will post about that in another thread.

thanks again.
danontoast
 
Posts: 3
Joined: Fri Jun 22, 2012 3:41 pm

Re: Importing images and DWG / DXF files into cutting softwa

Postby jeb2cav » Tue Jun 26, 2012 2:06 pm

And you don't have to take our word for it (lol) - you can download fully functional trial versions of VCarve Pro and/or Aspire at www.vectric.com and see for your self. There are great tutorials available as well.
jeb2cav
Site Admin
 
Posts: 1504
Joined: Thu Sep 30, 2010 7:04 pm
Location: Kentucky

Re: Importing images and DWG / DXF files into cutting softwa

Postby budwood2 » Wed Aug 01, 2012 4:40 pm

Here is a web site that offers to make height map faces for cnc carving:

http://www.patternhelp.com
budwood2
 
Posts: 2
Joined: Wed Dec 14, 2011 10:49 pm

Re: Importing images and DWG / DXF files into cutting softwa

Postby gicag » Tue Jul 31, 2018 4:55 pm

When we capture the pic of anyone that is too large to adjust it so I found the software. In this we have all dissertations services by this helps us to make the reduce the photo size and adjustable form.
gicag
 
Posts: 1
Joined: Sat Jul 21, 2018 4:21 am


Return to Software. Programming

Who is online

Users browsing this forum: No registered users and 2 guests