new Piranha and want to purchase Vcarve.
Moderators: al wolford, sbk, Bob, Kayvon
new Piranha and want to purchase Vcarve.
I purchased a new piranha directly from a local Rokler store today. I would like to up grade to the Vcarve pro before registering the 2d software. I was told I will need to send the 2d software in wile they shipe the Vcarve. Is there anyway to do this and still try to try out the cnc?
Re: new Piranha and want to purchase Vcarve.
Sorry about the late reply. The answer is yes. All you need is a tap file generated by someone else. Transfer it to a thumb drive then plug that drive into your Piranha pendant.
You can try this file...it says txsteel. It's about 6 inches wide 2 inches high. Do an air cut first. Then use a 90 V bit.
Bob
You can try this file...it says txsteel. It's about 6 inches wide 2 inches high. Do an air cut first. Then use a 90 V bit.
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)
Antonie Van Leeuwenhoek (Developer of the microscope.)
Re: new Piranha and want to purchase Vcarve.
I believe you can try out any vectric software on a demo basis.
That may tide you over till your regular version arrives.
http://www.vectric.com/downloads/trial-software.html
That may tide you over till your regular version arrives.
http://www.vectric.com/downloads/trial-software.html
-
- Posts: 22
- Joined: Mon Dec 15, 2014 8:06 pm
Re: new Piranha and want to purchase Vcarve.
I was never offered any sort of upgrade to vcarve when I bought my piranha back in mid December and of course my cut 2d is now registered.
What kind of offer were you given? If I were to wish to upgrade what options might I have?
What kind of offer were you given? If I were to wish to upgrade what options might I have?
Re: new Piranha and want to purchase Vcarve.
Vectric themselves will let you upgrade up their software scale for essentially the difference in retail price.
http://www.vectric.com/store.html
http://www.vectric.com/store/upgrade/cut2d-vcp.html
You don't need to go back to NextWave or send in your unopened Cut2D box.
http://www.vectric.com/store.html
http://www.vectric.com/store/upgrade/cut2d-vcp.html
You don't need to go back to NextWave or send in your unopened Cut2D box.
Re: new Piranha and want to purchase Vcarve.
I have a VcarvePro and Cut3d that came with my HD. I have never registered it since I went straight to Aspire.
If anyone is looking for this, I'll sell it for $200. Just PM me.
If anyone is looking for this, I'll sell it for $200. Just PM me.
"Out of my mind.....back in 5 minutes"
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner
Re: new Piranha and want to purchase Vcarve.
thanks everyone for the replays. I did a couple cuts with some of Vectric's samples. I have a lot to learn.
Re: new Piranha and want to purchase Vcarve.
Joe,
I got the upgrade for $250. It shows on their site as $450 if your Vcarve is registered, but I thought she told me it would be $400 as they are running a special.
I got the upgrade for $250. It shows on their site as $450 if your Vcarve is registered, but I thought she told me it would be $400 as they are running a special.
joethegasman wrote:I was never offered any sort of upgrade to vcarve when I bought my piranha back in mid December and of course my cut 2d is now registered.
What kind of offer were you given? If I were to wish to upgrade what options might I have?
Re: new Piranha and want to purchase Vcarve.
thank you. wasn't trying to hijack the thread. this is sold.studio-n wrote:I have a VcarvePro and Cut3d that came with my HD. I have never registered it since I went straight to Aspire.
If anyone is looking for this, I'll sell it for $200. Just PM me.
"Out of my mind.....back in 5 minutes"
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner