Some how I have lost a .crv3d program. I have all the .tap tool paths but I need to make corrections on the .taps.Is there anyway to input or whatever to recover the .crv3d or do
I have to start all over? Lost in space here. Thanks
lost crv3d
Moderators: al wolford, sbk, Bob, Kayvon
Re: lost crv3d
If you can remember the name of the file the first two things I would try is:
1) open your finder and click you your C: drive. In the search box at the upper right hand corner, enter the name or partial name and have it search your drive
to see if it got moved.
2) Double click to Open your recycle bin and repeat the search in the finder.
You could also limit the search to crv3d files to have it show you all.
If it isn't in either of those, it may be gone for good.
1) open your finder and click you your C: drive. In the search box at the upper right hand corner, enter the name or partial name and have it search your drive
to see if it got moved.
2) Double click to Open your recycle bin and repeat the search in the finder.
You could also limit the search to crv3d files to have it show you all.
If it isn't in either of those, it may be gone for good.
"Out of my mind.....back in 5 minutes"
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner
Re: lost crv3d
I tried all of them and had no results. Thanks for your input. I went ahead and reprogrammed the whole thing.
Cheers
Cheers