updates

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
gpeck
Posts: 181
Joined: Fri Sep 06, 2013 1:35 pm

updates

Post by gpeck »

Is there another update since 8.024 ?

studio-n
Posts: 180
Joined: Wed Aug 06, 2014 4:25 pm
Location: Dallas, TX
Contact:

Re: updates

Post by studio-n »

You can go to the HELP tab and select CHECK FOR UPDATES
to find out.
"Out of my mind.....back in 5 minutes"
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner

gpeck
Posts: 181
Joined: Fri Sep 06, 2013 1:35 pm

Re: updates

Post by gpeck »

The reason I asked ,when I opened the controller to download a file it asked if I wanted to update so I did (mistake) it down loaded the update 1.6 . I thought that was an older version, and now I have to reregister within 15 days. I was so frostrated I just shut it down. I hope I can still use 8.024... thanks for the the reply

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: updates

Post by Rando »

If you re-install the current version, it might "find" the registration information in the registry and play nice.
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: updates

Post by tonydude »

gpeck,

Where did you get the 8.024 from? From what I know that version is for vectric programs not the controller.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

Post Reply