feedrate modal or not
Moderators: al wolford, sbk, Bob, Kayvon
feedrate modal or not
Is the federate supposed to be modal in the HD3 control?
Re: feedrate modal or not
Albers
Feedrate should be modal, but not apply to rapids. So a G01 X10 Y10 F10.0 will move to that location using F10.0, but if the next line is G00 X0 Y0, that F10.0 won't apply to that G0 rapids-move. But, you knew that .
I'm not aware of any setting that would change Feedrate to a non-modal setting. There are rare GCODE places where a feedrate code is given but isn't modal. But, IIRC those are canned cycles that accepted an F axis value, but didn't directly affect the G01/G02/G03 feedrate. Yeah, at one point I decided to read the entire 300+ page HAAS controller manual. Surprising what the big-boys can do .
Hope that helps. Are you seeing an issue where it appears to be non-modal?
Cheers!
Thom
P.S. Apologies for the (very!) late response; I was moving houses and was offline for a couple months. Nice to be back!
Feedrate should be modal, but not apply to rapids. So a G01 X10 Y10 F10.0 will move to that location using F10.0, but if the next line is G00 X0 Y0, that F10.0 won't apply to that G0 rapids-move. But, you knew that .
I'm not aware of any setting that would change Feedrate to a non-modal setting. There are rare GCODE places where a feedrate code is given but isn't modal. But, IIRC those are canned cycles that accepted an F axis value, but didn't directly affect the G01/G02/G03 feedrate. Yeah, at one point I decided to read the entire 300+ page HAAS controller manual. Surprising what the big-boys can do .
Hope that helps. Are you seeing an issue where it appears to be non-modal?
Cheers!
Thom
P.S. Apologies for the (very!) late response; I was moving houses and was offline for a couple months. Nice to be back!
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)