need help

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: sbk, al wolford

need help

Postby Flipz52 » Sun Jul 30, 2017 9:41 am

Could someone look at this file I created. I have watched some videos and the vcarve program it says that if you select and entire design the program will determine the correct lines to cut inside and out. I cannot get this file to work after hours of working it. It is projecting the inside cut paths as (the V areas and the diamond in the middle to where some of my lines are being cut on the inside and others on the outside. I cant seem to get only the outside line around the entire project to cut on the outside and then all the inside lines to cut on the inside of the line. If anyone could help please do.....feeling frustrated... :oops:
1sgrank attempt to fix.crv
(75 KiB) Downloaded 89 times
Posts: 1
Joined: Wed Jun 28, 2017 9:23 pm

Re: need help

Postby sharkcutup » Sun Jul 30, 2017 12:16 pm

File written in Version 9.008 so I am not able to help. I have not upgraded as of yet.

Shark HD3 Pro Plus Extended Bed with Spindle
Facebook: Hogan's CNC Crafts
Posts: 308
Joined: Tue Mar 08, 2016 5:23 pm

Re: need help

Postby Bob » Sun Jul 30, 2017 4:41 pm

1sgrank attempt to fix v1.1.crv
(71 KiB) Downloaded 88 times
Check this one and see if it works for you.
Let me know if it works and if you want to know how I fixed it.
User avatar
Posts: 1095
Joined: Sun Aug 08, 2010 3:35 pm

Re: need help

Postby tonydude » Sun Jul 30, 2017 7:53 pm

Try this. I used a endmill for all. Is this what you want?

(269.5 KiB) Downloaded 75 times

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 9.510, photo vcarve, cnc mako shark extended bed, control panel 2.1
Posts: 1500
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Return to Software. Programming

Who is online

Users browsing this forum: No registered users and 1 guest