Page 1 of 1
virtual touch plate connection trouble
Posted: Mon Aug 27, 2018 9:57 am
by lockeb
When I activate the virtual zero, I get a message that says " cannot detect touch plate. I have un plugged and re plugged several times with no success. Any suggestions? Controller 5697 M.
Sent from my iPad
Re: virtual touch plate connection trouble
Posted: Sun Sep 30, 2018 9:05 pm
by KevinO
Hi lockeb,
I had the same problem a while back. I tried a new cable and that fixed the problem. NWA sells them for about $30.
http://shop.nextwaveautomation.com/shop ... ?itemid=82
It's cheaper than buying a new touch plate, although it might not fix it for you.
Kevin
Re: virtual touch plate connection trouble
Posted: Thu Oct 04, 2018 10:09 am
by TAW
I had to do my registration again to fix mine- screen was gray and could not use.
Re: virtual touch plate connection trouble
Posted: Thu Nov 08, 2018 8:42 am
by lockeb
Problem resolved. Electrical surge. Learned an expensive lesson. New motherboard on the cp unit.