I cannot cut arcs. Followed VCarve instructions, created a closed vector (a polyline with an arc for a profile cut), created a TAP file with the CNCShark-USB NewArcsc (mm) PP but my Shark II won't cut the arc. There are 2 little notches at the bottom where arc begins to be cut, but turns and forms a straight line. Got the VCarve file, the TAP and a photo of the finished "product".
https://drive.google.com/drive/folders/ ... sp=sharing
Could y'all please help?
Thank YOU,
Matt Holland
HollandCraft
p.352.470.9280
i can't cut arcs
Moderators: al wolford, sbk, Bob, Kayvon
Re: i can't cut arcs
Post a screen shot of your file so we an look at it
-
- Posts: 2
- Joined: Fri Dec 14, 2018 9:57 pm
Re: i can't cut arcs
Hmm...Not sure what you mean by screenshot. I attached all of the project files (TAP, CRV and JPG) in my original post. Will this help?