Does anyone have a file to cut out FIDGET SPINNERS?

Share your Shark projects with other forum members!

Moderators: al wolford, sbk, Bob, Kayvon

Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.
Post Reply
jonathanmoczy
Posts: 2
Joined: Thu Jan 19, 2017 5:10 pm

Does anyone have a file to cut out FIDGET SPINNERS?

Post by jonathanmoczy »

Looking for a file to cut out fidget spinners that are all the rage right now. My son really wants us to make one on the CNC. I am needing a file for a fidget spinner with 22mm bearings. Any help would be appreciated!
Attachments
il_340x270_1188696148_gvuy.jpg

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Post by Bob »

Like this?
spinner.crv
six nickel spinner
(295 KiB) Downloaded 542 times
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Post by Bob »

Here's one that's twice as good:
spinner X 6.crv
(328.5 KiB) Downloaded 540 times
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Post by Bob »

This one's worth three dollars:
dollar spinner.crv
(354 KiB) Downloaded 516 times
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Post by Bob »

Be sure to prepare the bearing by removing the side dust covers and all lubrication. Use them with no lubrication.
Bob
And remember, On all of these designs, your results may vary...
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Post by Bob »

And, How about this...The directions. Remember, your results may vary.
This is how I made some Spinners.docx
(32.16 KiB) Downloaded 530 times
Bob

Is that enough information yet, Jonathan?
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

jonathanmoczy
Posts: 2
Joined: Thu Jan 19, 2017 5:10 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Post by jonathanmoczy »

Thank you Bob! Have not yet had a chance to check out your files but I will this evening. I really appreciate the response. I am just now learning this myself and made the attached file last night. It worked pretty good. Also, thanks for the tips on the bearings. I tried to epoxy them in place but it did not go so well..

Jonathan
Attachments
Fidget_Spinner.crv
(384.5 KiB) Downloaded 482 times

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Post by Bob »

Jonathan,
You're welcome.
And, thanks for posting your crv!
Have fun and try not to make the experience too complicated.
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

Post Reply