Does anyone have a file to cut out FIDGET SPINNERS?

Share your Shark projects with other forum members!

Moderators: sbk, al wolford

Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.

Does anyone have a file to cut out FIDGET SPINNERS?

Postby jonathanmoczy » Fri May 12, 2017 10:46 am

Looking for a file to cut out fidget spinners that are all the rage right now. My son really wants us to make one on the CNC. I am needing a file for a fidget spinner with 22mm bearings. Any help would be appreciated!
Attachments
il_340x270_1188696148_gvuy.jpg
jonathanmoczy
 
Posts: 2
Joined: Thu Jan 19, 2017 5:10 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Postby Bob » Fri May 12, 2017 12:54 pm

Like this?
spinner.crv
six nickel spinner
(295 KiB) Downloaded 55 times

Bob
User avatar
Bob
 
Posts: 1050
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Postby Bob » Fri May 12, 2017 12:55 pm

Here's one that's twice as good:
spinner X 6.crv
(328.5 KiB) Downloaded 48 times

Bob
User avatar
Bob
 
Posts: 1050
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Postby Bob » Fri May 12, 2017 12:57 pm

This one's worth three dollars:
dollar spinner.crv
(354 KiB) Downloaded 51 times

Bob
User avatar
Bob
 
Posts: 1050
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Postby Bob » Fri May 12, 2017 12:59 pm

Be sure to prepare the bearing by removing the side dust covers and all lubrication. Use them with no lubrication.
Bob
And remember, On all of these designs, your results may vary...
User avatar
Bob
 
Posts: 1050
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Postby Bob » Fri May 12, 2017 1:05 pm

And, How about this...The directions. Remember, your results may vary.
This is how I made some Spinners.docx
(32.16 KiB) Downloaded 79 times

Bob

Is that enough information yet, Jonathan?
User avatar
Bob
 
Posts: 1050
Joined: Sun Aug 08, 2010 3:35 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Postby jonathanmoczy » Sat May 13, 2017 10:46 am

Thank you Bob! Have not yet had a chance to check out your files but I will this evening. I really appreciate the response. I am just now learning this myself and made the attached file last night. It worked pretty good. Also, thanks for the tips on the bearings. I tried to epoxy them in place but it did not go so well..

Jonathan
Attachments
Fidget_Spinner.crv
(384.5 KiB) Downloaded 39 times
jonathanmoczy
 
Posts: 2
Joined: Thu Jan 19, 2017 5:10 pm

Re: Does anyone have a file to cut out FIDGET SPINNERS?

Postby Bob » Sat May 13, 2017 4:18 pm

Jonathan,
You're welcome.
And, thanks for posting your crv!
Have fun and try not to make the experience too complicated.
Bob
User avatar
Bob
 
Posts: 1050
Joined: Sun Aug 08, 2010 3:35 pm


Return to Shark Project File Sharing.

Who is online

Users browsing this forum: No registered users and 1 guest