Dumb question from a big dummy

Discussion about the CNC Shark Pro Plus HD

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
User avatar
meb
Posts: 100
Joined: Fri Aug 06, 2010 6:49 pm
Location: Nevada, Texas

Re: Dumb question from a big dummy

Post by meb »

It all started with the Shark 18x24 w/MDF bed that used the Bosch Colt trim router. Then came the Shark Pro 24x24 w/MDF bed at used the Bosch Colt trim router. Then the Shark Pro+ 24x24 w/aluminum bed that used the Bosch Colt trim router. Then the Shark Pro HD1 w/aluminum bed and able to handle the 2 1/4 hp routers. Then Shark HD2. Then I think the Piranha. Some special edition HD2 machines. Then the Shark HD3 and HD3 extended bed.

The aluminum bed has gone through several changes since the original blue bed, some had the black bed like the piranha now has, then the bed they now have. Many other changes have taken place since the CNC Shark came on the market.

User avatar
bill z
Posts: 342
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: Dumb question from a big dummy

Post by bill z »

Isn't the Shark Pro Plus HD the HD model with a 7 inch Z axis where the others only have a 5 inch Z axis?

rsetina
Posts: 213
Joined: Sat May 04, 2013 5:05 pm

Re: Dumb question from a big dummy

Post by rsetina »

bill z wrote:Isn't the Shark Pro Plus HD the HD model with a 7 inch Z axis where the others only have a 5 inch Z axis?
I think that's correct.
Rick

Post Reply