CNC Software HD 2.0 plus

Discussion about the CNC Shark Pro Plus HD

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
KTHansen
Posts: 1
Joined: Mon Apr 18, 2016 6:02 pm

CNC Software HD 2.0 plus

Post by KTHansen »

First question- do I use the software on the cd that came with the machine or do I download the software that is on the website? Second question - the laptop I am going to use to run the cnc has windows 8. Should I upgrade to windows 10 prior to installing the software.

sharkcutup
Posts: 408
Joined: Tue Mar 08, 2016 5:23 pm

Re: CNC Software HD 2.0 plus

Post by sharkcutup »

First Question: Load the software that came with the machine then look for and click the "Check for updates" some place usually under "about" in the menu selections.

Second Question: Both windows 8 and Windows 10 work so that would be up to you which version you are familiar with and want to use.

Be SAFE around those AWESOME Machines!!!
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

rsetina
Posts: 213
Joined: Sat May 04, 2013 5:05 pm

Re: CNC Software HD 2.0 plus

Post by rsetina »

I had windows 8 at first and later when it came out I upgraded to 10. So I'm sure, either way you do it, it will be fine.
Rick

Post Reply