Tap file
Moderators: al wolford, sbk, Bob, Kayvon
Tap file
We have a new Shark that we just got set up. We followed all the documentation we received with the machine. We used the probe and found zero for x,y,z. We created a sign in Vcarve and saved it as a .tap file on a usb drive. We installed the USB drive in the controller and it gave an error message. It said USB not supported, press to continue. The screen when blank and when pressed, the boxes that it has on start up come back. Any ideas on what might be wrong?
-
- Posts: 408
- Joined: Tue Mar 08, 2016 5:23 pm
Re: Tap file
Click on board index above, then click view active topics, then click return to advanced search Type in "USB not recognized" and you will find plenty of threads covering this topic I am positive you will find the answer you are looking for there!!!
Sharkcutup
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: Tap file
You don't mention what machine you have
If the new Shark you bought is a HD4, then you need to plug the usb stick into the pendant and not the control box, otherwise it will not work!
The pendant will show the file on the usb stick. All you have to do is select it and press run. The machine will do the rest.
If the new Shark you bought is a HD4, then you need to plug the usb stick into the pendant and not the control box, otherwise it will not work!
The pendant will show the file on the usb stick. All you have to do is select it and press run. The machine will do the rest.