LCD pendant hd4 no screen output

Discussion about the CNC Shark Pro Plus HD

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
henrixx
Posts: 1
Joined: Thu Feb 23, 2017 2:35 pm

LCD pendant hd4 no screen output

Post by henrixx »

Hd4 LCD pendant has no screen out put it just make beep sound constantly

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: LCD pendant hd4 no screen output

Post by Rando »

Other than the normal "check everything" advice, I'd also look for bent/broken pins in the cable between the pendant and the controller. If the controller works with the control panel software, via USB, then the issue you're seeing is likely either in the pendant cable or in the pendant itself. The reasons could be many, but...

Sounds like a job for Next Wave's tech support staff....

https://shop.nextwaveautomation.com/shop/contactus.aspx

Regards,

Thom
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

Post Reply