Registering or transfering ownership

Discussion about the CNC Shark Pro Plus HD

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
DougE
Posts: 43
Joined: Sat Oct 06, 2012 12:37 pm

Registering or transfering ownership

Post by DougE »

Hi

I am going to be gifting my nephew with my CNC SHark HD Pro for Christmas.

I was wondering what I would need to do to transfer the control panel software over to him. He will be putting this onto his own laptop/computer to use in his workshop.

It is the old version 1.5 control panel.

I also need to know what to do regarding the touch-plate. I have located the box that it came in but not the piece of paper with the code number on it. I did notice there is a 6 digit code on the cord itself (xxx-xxx) is this perhaps the code number he will need to register this piece of hardware with ?

Thank you for your help

DougE

majorbdk
Posts: 28
Joined: Wed Mar 14, 2012 1:37 pm

Re: Registering or transfering ownership

Post by majorbdk »

I know this is a late answer but I purchased a second machine (Mako model) from someone on here. I contacted New Wave and they gave me the codes for the most current license. Not sure if you would have to pay for the most recent. Best to just call or email them with the questions.

Post Reply