Y axis
Moderators: al wolford, sbk, Bob, Kayvon
Re: Y axis
If you have vcarve desktop you are limited to the max size setup in the program, whereas vcarve pro does not. Do you have desktop?
VCarve Desktop only supports job sizes up to a maximum of 25.0 inches x 25.0 inches without tiling. You can cut jobs larger than this limit but you will need to use the
Toolpath Tiling feature to cut the job in sections.
VCarve Pro allows you to work with any job size meaning that there are no limitations to the size you want to work with.
Tony
VCarve Desktop only supports job sizes up to a maximum of 25.0 inches x 25.0 inches without tiling. You can cut jobs larger than this limit but you will need to use the
Toolpath Tiling feature to cut the job in sections.
VCarve Pro allows you to work with any job size meaning that there are no limitations to the size you want to work with.
Tony
Last edited by tonydude on Tue Jan 30, 2018 2:19 pm, edited 1 time in total.
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Y axis
tooldude,
Here is what vectric says http://www.vectric.com/products/desktop ... rison.html
http://www.vectric.com/products/desktop ... rison.html
Tony
Here is what vectric says http://www.vectric.com/products/desktop ... rison.html
http://www.vectric.com/products/desktop ... rison.html
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Y axis
I do have VCarve Pro 9.014, I am not having the problem in the design itself ( on the computer ) its when I go to the HD4 itself I try to set the parameters on the pendant to the board size. It does accept the 11.375 but when I put in any number longer than 30 it resets that number to 30 no longer that that. With that being said do I type it in or do I use the pendant and try to set it up manually. I was wanting to use the touch plate.
Re: Y axis
tooldude,
What cnc machine are you using? If it's the piranha your only allowed 30 inches on the Y axis period.
Tony
What cnc machine are you using? If it's the piranha your only allowed 30 inches on the Y axis period.
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Y axis
It's dueling dudes!
Abide ye well, arrrrgh
Abide ye well, arrrrgh
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)