Replacement Controller Switch

Discussion about the CNC Shark Pro Plus HD

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
mike97520
Posts: 3
Joined: Fri Oct 16, 2015 8:44 am

Replacement Controller Switch

Post by mike97520 »

I have a shark HD3 controller. The switch on the back is arcing inside and randomly shuts off. You can hear switch crackle inside as you turn it off & on. The switch is contained within a plastic housing where power cord also plugs in. There is also a fuse inside the plastic housing. Does anyone know if this is a replaceable part?
It is fairly easy to replace and I used to do electronic repair, but there are no numbers on switch housing or receptacle. How do you go about obtaining one of these babies? Thanks.

Junior
Posts: 16
Joined: Sun Jun 17, 2012 9:48 pm

Re: Replacement Controller Switch

Post by Junior »

If you google "switch with fuse" you will get a ton of hits

Barry Anderson
Posts: 52
Joined: Sun Dec 21, 2014 9:55 pm

Re: Replacement Controller Switch

Post by Barry Anderson »

You can probably get one from Next Wave. They have always been very responsive when I had a need or problem.

Barry
Barry Anderson
Anderson Custom Woodwork, Inc.

Post Reply