touch screen calibration
Moderators: al wolford, sbk, Bob, Kayvon
-
- Posts: 7
- Joined: Wed Jun 17, 2020 3:31 pm
touch screen calibration
I had to estop my machine, when i went to restart it i get a message on my touch screen that said. Performing touch screen calibration touch screen to continue. When i touched it to continue it didn't do anything. I have an extra touch screen, i hooked it up and it worked fine. I put other screen back on and got same message. What did i do ?
Re: touch screen calibration
Get ahold of nextwave on Monday, since they are off on the weekends.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 7
- Joined: Wed Jun 17, 2020 3:31 pm
Re: touch screen calibration
They sent me instructions to calibrate the touch screen. Works just fine now
Re: touch screen calibration
Would you be willing to share the instructions here? It would make a useful addition for future users who have the same question.
-
- Posts: 7
- Joined: Wed Jun 17, 2020 3:31 pm
Re: touch screen calibration
Here it is, I had to clean it a couple of times
- Attachments
-
- LCD Cleaning.pdf
- (1.87 MiB) Downloaded 435 times