lead screw specs
Moderators: ddw, al wolford, sbk, Bob, Kayvon
-
- Posts: 2
- Joined: Sun Feb 27, 2011 12:13 am
lead screw specs
Does anyone know the lead screw specs on the cnc shark?
Re: lead screw specs
We have used a few differnt lead screws over the years.
We use a modified multi-start lead screw that is either 4 turns per inch or 2 turns per inch depending on the machine.
We use a modified multi-start lead screw that is either 4 turns per inch or 2 turns per inch depending on the machine.