Page 1 of 1
Help on searching Router Bits
Posted: Thu Nov 17, 2011 5:37 pm
by enriquewoodcarver
Im looking for Ball nose router bits if anyone can help me on find or knowing any site that can be helpful to find ball nose end mill carbide or ZrN of 1/16 diameter and cutting length more than 3/4 thank you....
Re: Help on searching Router Bits
Posted: Thu Nov 17, 2011 6:58 pm
by saramos
http://www.precisebits.com/products/car ... 250b4f.asp
Third item down: 0.0625 in, (1.59 mm) dia. 4-flute 5.4° Tapered Ball-nose Carving bit, 1.00 in. DOC, 1/4 in. shank, 2.0 in. OAL
Fourth item down: 0.0625 in, (1.59 mm) dia. ZrN coated 4-flute 5.4° Tapered Ball-nose Carving bit, 1.00 in. DOC, 1/4 in. shank, 2.0 in. OAL
Scott
Re: Help on searching Router Bits
Posted: Sun Nov 20, 2011 7:11 am
by James King
Hi Enrique,
I have been getting my bits from SparkTech, Inc. He has a 1/16", four flute bit. I buy 5 at a time for $22.
Email:
sales@sparktechinc.com His phone number is 512-716-3131 and ask for Oliver. He has also shipped them for free.
Re: Help on searching Router Bits
Posted: Sun Nov 20, 2011 11:21 am
by SPH01
You might check
www.vortextool.com Not as well known in the home shop but they are real big in production shop cutters.
Re: Help on searching Router Bits
Posted: Sun Nov 20, 2011 11:34 am
by jeb2cav
Re: Help on searching Router Bits
Posted: Mon Nov 21, 2011 5:19 pm
by enriquewoodcarver
Thanks for the sites n #s and if u guys know more places, let me know thank you very much!!!