Welcome to CNC Shark Talk!

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

4DThinker
Posts: 951
Joined: Wed Jun 27, 2012 9:00 am

Re: Welcome to CNC Shark Talk!

Post by 4DThinker »

The company is NextWave Automation, and you can contact then directly. 419 318-4822. 1 to 2 weeks would have held if Rockler had any in stock. They are a big thing, and as Rockler now sells more than one brand they may not even order any for stock since NextWave is in the USA anyway. NextWave may have had to build-to-order your Shark, and I'm guessing that would easily take an extra week. In this age of free 2-day shipping I know it pains us to wait 3 or 4 weeks for something we think we've paid for, but that is more the norm for big shop tools. I've got an X-Carve kit coming to add to my collection but it has already been 3 weeks with no shipping notice.

lawrence
Posts: 8
Joined: Sat Nov 07, 2015 5:30 pm

Re: Welcome to CNC Shark Talk!

Post by lawrence »

Hello all, my name is Lawrence Richards. I retired from the USAF a little under 2 years ago and my family and I settled on Whidbey Island in WA state. I've been a hobby woodworker for a few years now, but startedplaying with a hobby CNC (Carvewright- which I no longer use) in 2010. A portfolio of some of my work can be found here
http://s171.photobucket.com/user/ldr_kl ... lio?sort=6

I recently set up an LLC called Reflections of Service which will use carving, 3d printing and custom woodworking to make gifts and memorabilia, primarily for military and first responders.

I plan to run several CNCs at once and last week purchased the first of my "flock"- a Shark HD3 (holiday bundle). I'm immersing myself into the forum and help videos before I set things up (and am running new electricity into my shop)

I appreciate any additional tips etc you can offer and look forward to being a part of this forum.
Lawrence

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Welcome to CNC Shark Talk!

Post by tonydude »

Lawrence,

Also look at the vectric forum http://forum.vectric.com/ and look at the tutorials http://support.vectric.com/

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

jgl001
Posts: 1
Joined: Sat Apr 09, 2016 9:57 pm

Re: Welcome to CNC Shark Talk!

Post by jgl001 »

Hey all. Just got my shark hd3 extended bed up and going. I just have one question. How can I get the machine to run at a constant speed and not slow down in corners. I cut mdf only. And have been for over a year on my xcarve. I run it at 150 ipm and it never slows down and has no problem. How can I change this on the shark.
Thanks

Mike Latino
Posts: 4
Joined: Fri Apr 22, 2016 9:34 pm

Re: Welcome to CNC Shark Talk!

Post by Mike Latino »

Hello,
Can I use Windows 10 on a CNC Shark HD3

Thank you,
Mike Latino

Jimmy B
Posts: 11
Joined: Wed May 11, 2016 8:14 pm

Re: Welcome to CNC Shark Talk!

Post by Jimmy B »

I cant wait to get started with my shark. I WILL be asking everyone questions a lot....

Jimmy B
Posts: 11
Joined: Wed May 11, 2016 8:14 pm

Re: Welcome to CNC Shark Talk!

Post by Jimmy B »

If I wasn't paying attention to my bit speed rate when choosing, is there a water to change that at the shark control panel?

Jimmy B
Posts: 11
Joined: Wed May 11, 2016 8:14 pm

Re: Welcome to CNC Shark Talk!

Post by Jimmy B »

If I wasn't paying attention to my bit speed rate when choosing, is there a way to change that at the shark control panel?

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: Welcome to CNC Shark Talk!

Post by Rando »

Jimmy B wrote:If I wasn't paying attention to my bit speed rate when choosing, is there a way to change that at the shark control panel?
In a limited way, yes. You can adjust the feed-rate slider to slow down the XYZ movement, and depending on your router/spindle, you can independently change the bit RPM. Those settings are all blunt-force-weapons, however. It is preferred to go back into the toolpath generating software and adjust things there.

Notwitstanding, replying to this thread isn't really the place for the question; a separate thread would be more appropriate.

Hope that helps,

Thom
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

Jimmy B
Posts: 11
Joined: Wed May 11, 2016 8:14 pm

Re: Welcome to CNC Shark Talk!

Post by Jimmy B »

Ok, so every day when I log onto the shark control panel, the USB driver is missing. I have to reinstall the driver everything I log in. Why is it losing it?

Also, I am building clocks, and it sometimes tells me that I have open vectors when I don't. I'm not understanding how to get past that.

Post Reply