Mounting To Table

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
mkeuer
Posts: 2
Joined: Wed Jan 11, 2012 3:03 pm

Mounting To Table

Post by mkeuer »

Are there mounting holes on the base of the unit to mount the entire cnc workstation to a table?
Top
Loudspeakerboy
Posts: 106
Joined: Fri Sep 23, 2011 3:54 pm

Re: Mounting To Table

Post by Loudspeakerboy »

Not on my shark.. Easily done though.
Top
saramos
Posts: 83
Joined: Sun Apr 24, 2011 1:27 pm
Location: Nortridge, CA

Re: Mounting To Table

Post by saramos »

What I did with mine is to surround the base with 1/4 round molding.

DSCF4885.jpg
Top
fbrittain
Posts: 7
Joined: Thu Aug 19, 2010 8:58 pm

Re: Mounting To Table

Post by fbrittain »

I don't have holes but I just clamped it down. It sure helped the operation
Top
KevinJ
Posts: 4
Joined: Mon Sep 19, 2011 11:13 am

Re: Mounting To Table

Post by KevinJ »

The weight of the cnc shark and a thick rubber mat worked just fine for me on the table I made for my Shark Pro Plus HD.
Top
shonea
Posts: 5
Joined: Wed Dec 07, 2011 2:22 pm

Re: Mounting To Table

Post by shonea »

I just drilled 4 holes through the bottom and mounted it to the plywood surface it is sitting on using carriage bolts. It ain't moving!

-S
Top
Post Reply

Return to “CNC Shark”