Vcarve Pro
Posted: Mon Feb 20, 2012 3:20 pm
Hi
I am trying to learn and use Vcarve Pro. I bought a used machine and only have it a few days now. It came with version 4.602 I would like to try the machine out on cutting the test file Bulls_Head.dxf in the tutorial. It says to use a 1.25" 90 degree V_Carving tool. I do not have that bit yet as far as I know.
I bought a set of 4 bits at Harbor Freight. It comes with 1/8" Straight Cut Diam. 1/8", Cut Length 5/16" bit, 90 Degree V-Groove, Cut Diam. 1/2", Cut Length 1/2", 3/8" Corbox, Radius 3/16", Cut Diam. 3/8", Cut Length 3/8" bit, 1/2" Classical, Radius 3/32", Cut Diam. 1/2", Cut Length 1/2". Can I use any of these bits for the tutorial just to see what the machine will do or will I get bad results. If I can which bit should I try? Also can I use the same parameter in the tutorial or do I have to change something?
Thanks
Bruce
I am trying to learn and use Vcarve Pro. I bought a used machine and only have it a few days now. It came with version 4.602 I would like to try the machine out on cutting the test file Bulls_Head.dxf in the tutorial. It says to use a 1.25" 90 degree V_Carving tool. I do not have that bit yet as far as I know.
I bought a set of 4 bits at Harbor Freight. It comes with 1/8" Straight Cut Diam. 1/8", Cut Length 5/16" bit, 90 Degree V-Groove, Cut Diam. 1/2", Cut Length 1/2", 3/8" Corbox, Radius 3/16", Cut Diam. 3/8", Cut Length 3/8" bit, 1/2" Classical, Radius 3/32", Cut Diam. 1/2", Cut Length 1/2". Can I use any of these bits for the tutorial just to see what the machine will do or will I get bad results. If I can which bit should I try? Also can I use the same parameter in the tutorial or do I have to change something?
Thanks
Bruce