I see there are some of problems with bed sag, etc.
Here is a link to an old post I made on Vetric showing
my solution that has worked very well for me.
Two pieces of 3/4" ply with "tuning rods" underneath.
Since I "tuned" the table, it has been ROCK solid
and I have not had to retune
This was a cheap & easy fix for me!!
http://www.vectric.com/forum/viewtopic.php?f=3&t=8090
Jim
bed sag
Moderators: ddw, al wolford, sbk, Bob, Kayvon