Lead Screws keep loosening

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
davespenden
Posts: 19
Joined: Mon Oct 04, 2010 10:21 am

Lead Screws keep loosening

Post by davespenden »

Guys,
What is the best solution for securing the small set screws on the lead screws? The small one my X access travel continues to loosen up on me. I have to tighten it everytime I stop the router. I dont want to put something to permanent on it. I know many have had this issue.

Thanks
Dave

User avatar
RhB_HJ
Posts: 77
Joined: Fri Oct 22, 2010 5:49 pm
Location: Coldstream, BC Canada
Contact:

Re: Lead Screws keep loosening

Post by RhB_HJ »

If I understand the problem correctly I would say use Loctite 242.
Cheers

HJ
_______
Hans-Joerg Mueller
Coldstream, BC Canada

http://www.rhb-grischun.ca

Tim Owens
Posts: 361
Joined: Wed Jul 28, 2010 3:51 pm

Re: Lead Screws keep loosening

Post by Tim Owens »

We use gorilla Wood Glue on the treads before putting it in. We have found that locktight is alot more difficult to get off if you need too.

Post Reply