Hello Guys
Wondering if anyone could point me in the right direction to reproduce something like the included photo of some projects done with a Carvewright CNC.
Found instruction for layering text so maybe this would be similar.
Thank, Tom
CNC Shark Pro HD, V Carve Pro, Cut 3d, Vectric 3d Machinist
Can Overhanging patterns be done with a CNC Shark
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Can Overhanging patterns be done with a CNC Shark
Carving for the Grandkids!!
CNC Shark Pro HD, VCarve Pro, Cut 3d, Vectric Art 3d Machinist
CNC Shark Pro HD, VCarve Pro, Cut 3d, Vectric Art 3d Machinist
Re: Can Overhanging patterns be done with a CNC Shark
You need aspire to do that. Make the board longer and wider than the model and cutout a long the outline.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 229
- Joined: Sun Jan 29, 2012 8:01 pm
- Location: Central Ohio
Re: Can Overhanging patterns be done with a CNC Shark
Actually, you don't "need" Aspire to carve those but it does make it much easier.
I did many plaques, coat racks, etc. just like these using Cut 3D and VCarve Pro. What you will need is a lot of patience and time to figure out how to manipulate the images. You will also need the 3D images to use in Cut 3D so you can import them into VCarve Pro. You'll find yourself using the trim (scissors) quite a bit since you'll have to create several outlines of the images you want to carve.
The layering text method is completely different and won't do what you want.
There are a few examples in this photo. All of these were cut using VCarve Pro and/or Cut 3D. Now that I have Aspire, what used to take me days to design only takes me a few hours (I'm really picky).
I did many plaques, coat racks, etc. just like these using Cut 3D and VCarve Pro. What you will need is a lot of patience and time to figure out how to manipulate the images. You will also need the 3D images to use in Cut 3D so you can import them into VCarve Pro. You'll find yourself using the trim (scissors) quite a bit since you'll have to create several outlines of the images you want to carve.
The layering text method is completely different and won't do what you want.
There are a few examples in this photo. All of these were cut using VCarve Pro and/or Cut 3D. Now that I have Aspire, what used to take me days to design only takes me a few hours (I'm really picky).
Del
"It's not what you take when you leave this world behind you, it's what you leave behind you when you go."
"It's not what you take when you leave this world behind you, it's what you leave behind you when you go."
Re: Can Overhanging patterns be done with a CNC Shark
Thank You Tony And Del, I will Give it a go and see what happens.
Tom
Tom
Carving for the Grandkids!!
CNC Shark Pro HD, VCarve Pro, Cut 3d, Vectric Art 3d Machinist
CNC Shark Pro HD, VCarve Pro, Cut 3d, Vectric Art 3d Machinist