CNC and clock building

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

Re: CNC and clock building

Postby bill z » Mon Jun 12, 2017 1:54 pm

Kayvon,

This is a really cool clock and well done. I didn't understand the minute hand at first till I noticed the pegs riding on the cam. That is a great idea.
User avatar
bill z
 
Posts: 257
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: CNC and clock building

Postby Kayvon » Thu Jul 27, 2017 2:00 pm

Almost two months later and I'm still tinkering with it to get it running consistently. I had one instance where it ran for two days straight, but the slightest adjustment after that brought it back to a couple hours at a time. It's a work in progress.

My first clock, Simplicity, is still running great. It's extremely reliable and even survived a nephew forcibly yanking pieces apart at one point. I recently changed the hands out for thin walnut cuts, which provide a nice contrast that's easier to see from across the room.

Anyone else doing clockmaking recently?
User avatar
Kayvon
 
Posts: 292
Joined: Tue Oct 21, 2014 11:46 pm

Re: CNC and clock building

Postby cjablonski » Sun Jul 30, 2017 6:55 am

Not much to report on the horology front as life continues to happen (got married and in search of a new home) . I will note here that the HO completed in March has been running flawlessly since her first day and has now been adjusted to be accurate to within 1 minute per rewind ( 1 minute per week). Helps she is always in a climate controlled air conditioned space.My goal is once things settle down here in a bit (few months) I would love to tackle Claytons Leeds 7 day 3 wheel clock. She's silent (selling feature to the wife) and another 1 week runner. Fingers crossed this might happen by years end. Anyone else up to something new?
"I'm not smart, I just remain on problems longer"
Albert Einstein

Making many BTU by experimentation. ...some days it gets too warm :)
cjablonski
 
Posts: 218
Joined: Mon Aug 13, 2012 7:16 pm

Re: CNC and clock building

Postby bill z » Thu Aug 10, 2017 6:16 pm

I know what you mean cjablonski & Kayvon.

This Spring and Summer has been mostly doing for others and not giving much time for me at the CNC. I have a bunch of projects I want to do backing up. I have purchased everything for my Epicyclic clock but...

Really the other stuff is just an excuse. I could push stuff aside, and maybe I will the start of September.
User avatar
bill z
 
Posts: 257
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: CNC and clock building

Postby bill z » Wed Sep 20, 2017 6:33 am

Down here in Houston, there was some flooding and folks were putting flooded furniture and stuff on the curb for the county to hall off. Really sad.

There was this grandfather clock on top of the pile with a water mark half way up. I did stop to look at it because I love clocks.

It was the cheap battery thing in a grandfather box. However it did have a banjo pendulum and some weight cans. The weight cans were empty but looked nice.

After getting permission from the owner, I now have a banjo pendulum and some nice weight cans for one of my next clocks.
User avatar
bill z
 
Posts: 257
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: CNC and clock building

Postby cjablonski » Sat Jan 06, 2018 9:44 am

Been months, feels like years (and is soon climbing to be a full year) since my last build. "Adulting " has put the kabash on any woodworking outside of professionally. Now, due to purchasing our new home and an impending move, the shop in its entirety is in the process of being broke down to ship to its new home (2x the size easily with pre plumbed compressed air with remote and other goodies). Been a tough year on the build front. I've missed my goal of building the Leeds 7 day clock by years end, but she's still on the bucket list. With this post, my hope is to live vicariously through the creations of others to keep my spirits up along with the drive to continue building (sorta keep the fire alive and smiling through this tough patch). Keep the addiction going, ya know? :) Anyone done anything cool on the horology front of late?
"I'm not smart, I just remain on problems longer"
Albert Einstein

Making many BTU by experimentation. ...some days it gets too warm :)
cjablonski
 
Posts: 218
Joined: Mon Aug 13, 2012 7:16 pm

Re: CNC and clock building

Postby bill z » Wed Apr 25, 2018 6:36 am

I have to say that my clock has been running for some 2 years now and NOW is staring to stop. Sad, isn't it?

I figure after 2 years, it now needs a cleaning and re-polishing of the brass rods. If I add more weight, it will run again. I don't want to add more weight to overcome friction, I would rather reduce the friction.

2 years!!! How time flys!! <--;)
User avatar
bill z
 
Posts: 257
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: CNC and clock building

Postby cjablonski » Wed Apr 25, 2018 11:11 am

I know, right! I can't believe it's been 2 years! And as to the stoppage? Hell it ran UNTOUCHED for 2 YEARS! That itself is an achievement to behold.
I too am shocked as to how much time has flown by. I just wound my harmonic oscillator yesterday and saw she has been around for over a year now (13 months) and even that didn't break your record (had to tweak after 1 year).

When creating timepieces, it's odd how you lose track of time :D

Congratulations my good man, may she give you 100 more, and you be around to care for her.....
"I'm not smart, I just remain on problems longer"
Albert Einstein

Making many BTU by experimentation. ...some days it gets too warm :)
cjablonski
 
Posts: 218
Joined: Mon Aug 13, 2012 7:16 pm

Previous

Return to CNC Shark

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron