BobCAD v25 post for Shark HD 4

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
Bob C.
Posts: 3
Joined: Mon Dec 05, 2016 11:07 am

BobCAD v25 post for Shark HD 4

Post by Bob C. »

I am looking for a BobCAD V-25 post that will produce a usable program for my Shark HD 4. The post outputs a G83 code for peck drilling, but when I run the program in the Shark it plunges to depth instead of pecking. Everything else seems ok. I can edit the current post if someone knows what to change; I've looked but don't see what it is that needs changed.
Thanks, Bob C.

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: BobCAD v25 post for Shark HD 4

Post by tonydude »

If you use vcarve pro or aspire you can do peck drilling.

Tony
Attachments
drilling.PNG
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

Post Reply