Z Axis Cutting Too Deep

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
ElleGray
Posts: 4
Joined: Tue Feb 23, 2016 11:12 am

Z Axis Cutting Too Deep

Post by ElleGray »

I have been using my HD3 with virtual zero/touch plate with no problems for over a year now. Starting today, with using virtual zero/touch plate, all of my engravings are going too deep. The extra depth is consistent across the entire engraving. I have changed bits and tried different files (all of which I have engraved 50+ times so I am well aware of how they should appear) and the Z going too deep is consistent across the few different files I ran today. I checked my bits and the plate and nothing is off there so it must be in the settings somewhere.

Does anyone have experience with this or know of a way to check/reset settings?

Thank you!

Lauren

Ronwoodson2
Posts: 54
Joined: Wed Nov 07, 2012 2:02 pm
Location: Somerset Ky

Re: Z Axis Cutting Too Deep

Post by Ronwoodson2 »

Check the thickness of your touch plate in your settings. It may have been changed accidently
Ron Woodson
Somerset ,Ky
Ronwoodson2@aol.com

Post Reply