Nervous

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

Nervous

Postby rrsnith » Mon Nov 06, 2017 11:36 am

I ordered the CNC Shark and it hasn't arrived yet but I have been reading the installation down load instructions online and I'm getting nervous that I can't do this. I am computer illiterate and this is intimidating to say the least. All I want to do is make signs, just simple signs to sell. Will the software that comes with it do what I want? I hate to invest this kind of money for it to sit and collect dust. I almost got cold feet and canceled the order but my wife said to at least give it a try. I know from past computer experiences that things don't always go as planned and that's when I get lost. Please tell me this will be easy.
rrsnith
 
Posts: 1
Joined: Mon Oct 26, 2015 1:55 pm

Re: Nervous

Postby Barry Anderson » Mon Nov 06, 2017 1:12 pm

When I got mine, the instructions were easy to follow. And if you need help, the Next Wave, and Vectric folks are great to talk to.

Barry Anderson
Barry Anderson
Anderson Custom Woodwork, Inc.
Barry Anderson
 
Posts: 30
Joined: Sun Dec 21, 2014 9:55 pm

Re: Nervous

Postby TAW » Mon Nov 06, 2017 2:48 pm

you will be fine- that's what I go mine for too was signs... I am not computer literate either....
TAW
 
Posts: 96
Joined: Tue Oct 20, 2015 10:50 am

Re: Nervous

Postby Kayvon » Mon Nov 06, 2017 2:57 pm

Yes! Your software can certainly do signs. It'll take a little effort to learn the ins and outs of the software, but it's very rewarding.

You have a good resource here for asking questions, too. Don't be afraid to ask. Consider checking out some Vectric tutorial videos or (my preference) perusing the software instructinos.
User avatar
Kayvon
 
Posts: 241
Joined: Tue Oct 21, 2014 11:46 pm

Re: Nervous

Postby SteveM » Tue Nov 07, 2017 2:03 pm

The great thing about this hobby is there are thousands of video tutorials to watch on you tube, before you ever setup your machine.
I constantly am watching something.
The CNC manufacturer's have some really good ones to watch.
Legacy CNC has some of the best ones I have seen. There are others from Shop Sabre, Stinger and the very best videos are from Vectric.
That is probably the software you will be using and it is very easy to pick up just the basic ideas in a very short time span.
They actually have a fantastic forum and everyone there is happy to assist you.
Don't be afraid to make mistakes! Everyone on this forum and forums like this one, have great stories to share about how we screwed up something.
It's just all part of the learning process.
When getting started, don't start with expensive woods and don't worry about making scrap. I have boxes of mistakes just sitting around waiting for me to make something else with what I screwed up.
You can even start with cheap router bits, but as many on this and other forums will tell you is you get what you pay for and once you start making thing you will want to sell, you should be using good quality bits for a quality cut. They will also stay sharper longer and you won't wear them out tot fast.

Just relax, have fun with your new machine. When you get stumped use the forums for assistance. Everyone will be happy to assist you!

Steve
SteveM
 
Posts: 112
Joined: Thu Sep 08, 2016 1:29 pm
Location: Franklin, Wisconsin

Re: Nervous

Postby tonydude » Tue Nov 07, 2017 8:27 pm

Look at the tutorials at http://support.vectric.com/training-material and watch and do the tutorials along with it. Very helpful.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 8.511, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1411
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY


Return to CNC Shark

Who is online

Users browsing this forum: No registered users and 2 guests