design help

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

design help

Postby firefighter246 » Mon Nov 06, 2017 10:45 pm

Ok please bare with me and Im not sure If this even the right area? SO i am new to the cnc world, I have had my machine for a couple years but I was severely injured while on duty saving kids from a house fire and Im trying to get back to learning the machine a VCarve again. Is there anyone that could help me with how to use it and how to make other things and just a v bit sign such as over the phone or remote into my PC?? I have watched all the tutorials and I have questions... is there anyone out there the is willing to design a few simple things for me and I can just cut on my machine? thanks for all your help guys!! hope I posted this in the right area...
firefighter246
 
Posts: 12
Joined: Fri Jun 20, 2014 10:35 pm

Re: design help

Postby rcrick » Tue Nov 07, 2017 8:54 am

Where do you live?
rcrick
 
Posts: 48
Joined: Fri Jul 27, 2012 8:31 pm
Location: Toledo,Ohio (Home of the Shark)

Re: design help

Postby firefighter246 » Tue Nov 07, 2017 9:48 am

30 min from ft myers fl
firefighter246
 
Posts: 12
Joined: Fri Jun 20, 2014 10:35 pm

Re: design help

Postby tonydude » Tue Nov 07, 2017 8:30 pm

Watch the tutorials at http://support.vectric.com/training-material and learn along with it. Follow along with it, they are very helpful. That is where I learned and so did alot of other people, I'm still learning a thing or two even after 6 yrs of doing it.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 8.511, photo vcarve, cnc mako shark extended bed, control panel 2.1
tonydude
 
Posts: 1411
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: design help

Postby Ronwoodson2 » Wed Nov 08, 2017 4:08 pm

I will be in nearby Bonita Springs for a couple weeks starting Friday, Nov 10. Be glad to help you with your machine and program. If desired, I will provide contact info
Ron Woodson
Somerset ,Ky
Ronwoodson2@aol.com
Ronwoodson2
 
Posts: 54
Joined: Wed Nov 07, 2012 2:02 pm
Location: Somerset Ky

Re: design help

Postby firefighter246 » Fri Nov 10, 2017 11:13 am

ABSOLUTELY!!! pm ME
firefighter246
 
Posts: 12
Joined: Fri Jun 20, 2014 10:35 pm

Re: design help

Postby Ronwoodson2 » Fri Nov 10, 2017 12:04 pm

PM sent
Ron Woodson
Somerset ,Ky
Ronwoodson2@aol.com
Ronwoodson2
 
Posts: 54
Joined: Wed Nov 07, 2012 2:02 pm
Location: Somerset Ky


Return to CNC Shark

Who is online

Users browsing this forum: No registered users and 2 guests