How do I install the Laser post processor?

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
Roman2983
Posts: 2
Joined: Mon Oct 30, 2017 5:10 pm

How do I install the Laser post processor?

Post by Roman2983 »

How do I install the Laser post processor? I downloaded the file from NWA for shark HD but I cant run it or open a .pp file any one have a solution?

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: How do I install the Laser post processor?

Post by Rando »

You want to look in the application data folder of the Vectric software, which is usually:

"C:\Program Data\Vectric\VCarve Pro\V8.0" or whatever your version is.

There are two folders to use there:

PostP is where all the post processors live

My_PostP is where you copy just the ones YOU want to see. That way it trims down the list to only the machines you want.

Drop that .pp file into one of those, and it should show up in your Vectric tools (possibly after restart of the tool?)

Hope that helps get you moving!

Thom
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

Roman2983
Posts: 2
Joined: Mon Oct 30, 2017 5:10 pm

Re: How do I install the Laser post processor?

Post by Roman2983 »

Thank you.

Post Reply