Shark, Nextwave & Photocarve

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
mike97520
Posts: 3
Joined: Fri Oct 16, 2015 8:44 am

Shark, Nextwave & Photocarve

Post by mike97520 »

I have a Shark HD3 with the laser attachment. I have done several things with Aspire 9 and the results were pretty nice. I also have Photocarve 1.102 and thought it would be cool to photocarve some pictures with the laser. So far, I can't find out how to select the shark laser like I do in Aspire 9. I can still select an engraving bit and select the spindle speed of 1000 ( Laser on) and the feed rate of 40. But it doesn't allow me to select the depth/pressure of .001 inches so I can preview the engraving nor select the post processor = CNCShark-laser (inch) (*.tap) Has anyone else been able to laser with Photocarve?

monitoringpost
Posts: 96
Joined: Wed Nov 02, 2011 10:40 pm
Location: Canada

Re: Shark, Nextwave & Photocarve

Post by monitoringpost »

Sorry, you can't laser engrave with PhotoVCarve.

Post Reply