Won't cut at constant speed
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Won't cut at constant speed
I use a shark hd4 with a pendant. We use vcarve pro for software. We were cutting simple slots to make a speaker grill. The first 3 lines cut painfully slow then the next 4 cut super fast, then the last three slow again. All the design was lines across a rectangle then I made a profile toolpath that went on each line. Why would it do this?
-
- Posts: 409
- Joined: Tue Mar 08, 2016 5:23 pm
Re: Won't cut at constant speed
Please post a copy of your file here on the forum so we may review your file.
What post processor are you using to save your tool paths???
Sharkcutup
What post processor are you using to save your tool paths???
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: Won't cut at constant speed
zoom in on the line. is there an excessive # of nodes making up the line. The router may be trying to move from point to point like it is suppose to.
A straight line for instance should be 2 nodes. This happens a LOT when you import dxf files in which it is actually comprised of thousands of spines rather than real curves. cheers!
A straight line for instance should be 2 nodes. This happens a LOT when you import dxf files in which it is actually comprised of thousands of spines rather than real curves. cheers!
"Out of my mind.....back in 5 minutes"
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner
Rockler 60th Anniversary CNC Shark
w/digital probe, and 4th axis attachment.
ULS M300 Laser Engraver 50 Watt
Aspire and Corel Draw
NextEngine 2020i 3D scanner