Page 1 of 1

Tiling issue

Posted: Thu Nov 08, 2018 8:57 am
by lockeb
This is my first attempt at tiling. I have a 48x5 3/4 board. I want to use dowel holes to index x0. I put the 0 holes in the spoil board. Pic 1. Then mounted the board to be carved. I placed another dowel hole at Y 16. When I ran a test the y 16 hole is about an 1/8 short of y 16. It seems it is at the top of the T1 rather than splitting the line between t1 and T2.