help lost

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
tfewox
Posts: 2
Joined: Thu Dec 15, 2016 5:55 pm

help lost

Post by tfewox »

trying to figure out how to set this tool up right new to this need help I put in two pic trying to get the most out of bit using aspire 9.5 thank you
Attachments
Capture tool shot.PNG
Capture tool 2.PNG

Randy J
Posts: 7
Joined: Sun Oct 23, 2011 9:04 pm

Re: help lost

Post by Randy J »

I'd suggest you change the entry for the Tip Radius to .0625" so it matches the 1/16" spec from Amana.
Also, you should probably set your Pass Depth to .05" or maybe .1". The .203" seems aggressive for this bit.
I'd also reduce the "Clearance Pass Stepover" to 30-40%. And for the "Stepover" try 7-10% - this should still give you a smooth final pass.

Post Reply