Something for valentine's day. Used 3/8" cast acrylic with a 90 deg v bit going down .001 deep. It's 6" x 9" Took 28 minutes to carve.
Tony
Happy valentine's
Moderators: al wolford, sbk, Bob, Kayvon
Happy valentine's
- Attachments
-
-
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Happy valentine's
Tony,
Nice work as always. What's your source for Acrylic?
Nice work as always. What's your source for Acrylic?
Re: Happy valentine's
Bill,
Here is where I buy my acrylic from. http://www.estreetplastics.com/Plexigla ... r_s/21.htm
Tony
Here is where I buy my acrylic from. http://www.estreetplastics.com/Plexigla ... r_s/21.htm
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Happy valentine's
Yes, me too. The product is great but they charge an arm and a leg for shipping.
Re: Happy valentine's
Even with shipping it's still cheaper than anyone else. Even the plastic distributor about 5 miles away from my house is $5.00 - $10.00 more than online and l have to wait 3 weeks to get it from him. Online I get mine within a week.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
Keith Hodges
- Posts: 584
- Joined: Sun Jan 15, 2012 6:46 pm
- Location: North Little Rock, Arkansas
Re: Happy valentine's
That's crazy, but true in so many places. Guess I'm lucky, my supplier, Mr. Plastic in Little Rock was .15 cents cheaper on any item, and, no high shipping since I'm only 20 minutes away. Plus they let me dumpster dive for "LOTS" of usable scraps if my timing is right. estreetplastics is a good source, and only 3 days shipping time for me, but, as you know, shipping cost is pretty high, but not their fault.
Being retired is hard work. Spending way too much time in the shop these days. (And loving it).
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.