- Skep Acrylic
Acrylic 3D
Moderators: al wolford, sbk, Bob, Kayvon
Acrylic 3D
Would like to say thanks to all who have shared their knowledge on carving in acrylics - along with tips and traps on the wiring/lighting. I've had a chance to work with this material the last few months and thought I'd share this creation. The skep model was carved using a 3/16" BN acrylic bit from Amana.
Re: Acrylic 3D
Like your design on this, expecting more acrylics from you. How thick is the acrylic?
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Acrylic 3D
Hi Tony - it is 1/2". I like that thickness for a lot of things - so really haven't tried too much since kicking the tires on thinner and thicker.
-
WoodEraser
- Posts: 162
- Joined: Fri Jul 20, 2012 7:07 am
Re: Acrylic 3D
Nice job Joe !
Eric the "WoodEraser"
Sun City Center, Florida
If today were perfect there would be no need for tomorrow.
Sun City Center, Florida
If today were perfect there would be no need for tomorrow.
-
basecircle
- Posts: 488
- Joined: Fri Apr 08, 2011 2:14 pm
Re: Acrylic 3D
Great Job Joe.Nice job clean looking. Basecircle