Another Night light lithophane

Browse around for inspiration, or share your work to inspire others!

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Another Night light lithophane

Post by tonydude »

I used a .0625 ball nose bit carving .12 deep with a rpm of 16,000 and feed rate of 80 ipm. The size of corian is .25 thick and measures 3.75 inch wide x 3.125 high and took 1-3/4 hrs.

Tony
Attachments
IMG_1372.jpg
IMG_1375.jpg
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

jeb2cav
Site Admin
Posts: 1524
Joined: Thu Sep 30, 2010 7:04 pm
Location: Kentucky
Contact:

Re: Another Night light lithophane

Post by jeb2cav »

Really nice work Tony. Thanks for sharing this.

basecircle
Posts: 488
Joined: Fri Apr 08, 2011 2:14 pm

Re: Another Night light lithophane

Post by basecircle »

Very nice litho Tony Basecircle

tonydude
Posts: 1581
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: Another Night light lithophane

Post by tonydude »

Better photo.

Tony
Attachments
image.jpg
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

Post Reply