Another text on text sign
Moderators: al wolford, sbk, Bob, Kayvon
Another text on text sign
Another cedar sign done.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 584
- Joined: Sun Jan 15, 2012 6:46 pm
- Location: North Little Rock, Arkansas
Re: Another text on text sign
Looks good Tony. Can you direct me towards a tutorial on making these? Tried, but not as easy as it appears. Thanks. Keith
Being retired is hard work. Spending way too much time in the shop these days. (And loving it).
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Re: Another text on text sign
Keith,
I use aspire to do these. Very easy to do. Let me know if you have aspire.
Tony
I use aspire to do these. Very easy to do. Let me know if you have aspire.
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Another text on text sign
Tony,
I have the Trail of Aspire, if you posted the Patrick file, I would at least see how you get the text on top of the other text.
thank you
Wayne
I have the Trail of Aspire, if you posted the Patrick file, I would at least see how you get the text on top of the other text.
thank you
Wayne
Aspire 8.024, photo vcarve, cnc Shark 60th, control panel 2.1
Re: Another text on text sign
When doing text on text do the following. example: material size 5.375" x 11" make border 4.375" x 10", bottom letters are 3" high, top letters are 1-1/2" high. Click on bottom letters go to modeling tab click on create shape from vectors set base height at .125 and the angle at whatever you want, click apply than click start new component. Click on top letters base height at .25 and click on merge highest points with previous components, than click close. Go to toolpaths, click on 3d finishing toolpath, click on your border line pick .125 ball nose bit, click on selected vectors under maching limit boundary hit calculate. Preview toolpath, that's it.
Tony
Tony
- Attachments
-
- ken-jayne.crv3d
- (4.86 MiB) Downloaded 339 times
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Another text on text sign
Where is that in Aspire V8, please>tonydude wrote: click on merge highest points with previous components
Tony
L
If you can't blind someone with science, Confound then with B***S***
-
- Posts: 17
- Joined: Mon Nov 18, 2013 9:31 am
- Location: Brighton, CO
- Contact:
Re: Another text on text sign
I believe he's talking about the "Combine with other components..." setting when when modeling a new shape (third option):LeeWills wrote:Where is that in Aspire V8, please>tonydude wrote: click on merge highest points with previous components
Tony
L
You can also set the combine mode by right-clicking on the component from the component tree:
Re: Another text on text sign
Merge with , look at attachment.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.