Giant Jenga

basecircle · Post by **basecircle** » Tue Oct 20, 2015 6:15 pm

This is no big deal.My granddaughters Wanted the Giant Jenga game.So you know Grandpa.It's 54 blocks.I built a stand and a storage box for it.I used my Shark to carve the top used a 60 deg cutter.And the other thing I used my Shark on was the engraved plaque.That was easy using my diamond drag tool.Alot of work but it will last a lifetime.Basecircle

bill z · Post by **bill z** » Thu Oct 22, 2015 1:23 pm

I like it basecircle. Thanks for sharing.

Are those blocks 2X4X8? If so, it must weigh over 100 pounds! How much does it weigh?

The work you did on the box is exceptional.

jimily · Post by **jimily** » Fri Oct 23, 2015 6:51 pm

Good stuffs, losing at that jenga game could cause a concussion!

Where you do get your brass plates?

Jim

basecircle · Post by **basecircle** » Sat Oct 24, 2015 4:35 pm

Thanks Bill and Jim.Yes they were made from 2x4x8 54pcs.You notice the two industrial handles on the side.Two kids can move this around with no problem.(I had a problem goin up the stairs with it.) As for the brass plates I got them off E-Bay.Just type in engraving plates. Thanks Basecircle

jimily · Post by **jimily** » Mon Oct 26, 2015 8:14 am

Ok good, I'll go hunt for some.
Thanks!
Jim

CNC Shark Forum

Giant Jenga

Giant Jenga

Re: Giant Jenga

Re: Giant Jenga

Re: Giant Jenga

Re: Giant Jenga