My Awesome Guitar/Bass Combo Amp!
Moderators: al wolford, sbk, Bob, Kayvon
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
My Awesome Guitar/Bass Combo Amp!
This is what I call the Q11-B : TrainwRack. The worlds most awesome Combo-Amp!
The original idea was to add capability to my Peavey Bandit 112 Transtube practice amp. Using Autodesk Fusion 360, I designed the Q11-A:
But then I got carried away thinking about adding my 19" rack-mount components to the system, so ....
Last edited by jonquilmusic on Fri Jan 22, 2016 11:55 am, edited 1 time in total.
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
Here's and exploded view:
I even used Fusion 360 to create the toolpaths:
Then it was time to lay the MDF on my 2006 issue CNC SHARK PRO!
Last edited by jonquilmusic on Fri Jan 22, 2016 11:55 am, edited 1 time in total.
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
10 years old, and still going strong!
https://www.facebook.com/jon.henderson. ... 5040446000
The Base: The Rear Back: Putting them together:
https://www.facebook.com/jon.henderson. ... 5040446000
The Base: The Rear Back: Putting them together:
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
Test fitting the wheels:
The Shark Pro is a 2' x 2' machine, so I had to join some parts together to get the height!
And Again!
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
You get the picture. Glue and screw until this happens:
A little preparation for the finish:
And finish with Orange Peel Stage Equiptment paint:
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
Here's a close-up of the handle detail:
I designed and 3d printed the audio-rack-mount pieces - they're yellow - they retain 10-24 nuts in the back, so it's metal-on-metal!
Wheels and feet mounted!
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
Here's the handles held firmly in place with T-nuts. Overkill!
Same with the pocket wheels:
Here's a detail of the Rack-Mount rails with the 10-24 nuts inserted:
Last edited by jonquilmusic on Fri Jan 22, 2016 11:57 am, edited 1 time in total.
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
Time to start loading her up!
It's 10 full U's so it will need plenty of audio equiptment!!!
Set her upright by a shiny red car!
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
3D printed Switch and Jack plates:
Close-up.
- jonquilmusic
- Posts: 32
- Joined: Thu May 17, 2012 6:13 pm
Re: My Awesome Guitar/Bass Combo Amp!
All this gets crammed in:
Then wired:
Then 3D printed cones on mids and tweets: