I know I have seen this on the forum before but cannot seem to find any info now. Where can I buy supplies for lighting a lithophane?
Thanks
Jack
Lithophane Supplies
Moderators: al wolford, sbk, Bob, Kayvon
Re: Lithophane Supplies
Ebay lots there for led lights for lithos. Also for corian and candlestone.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
-
- Posts: 9
- Joined: Sat Jan 23, 2016 6:49 am
Re: Lithophane Supplies
Any idea what to look under I tried but I couldn't find anything that was useful.
Thanks
Jack
Thanks
Jack
Re: Lithophane Supplies
I also had advise from Tony and ordered from Ebay.
I bought this for my first try at candlestone, works great.
http://www.ebay.com/itm/10-Pieces-5-x7- ... SwBLlU5O1e
I also purchased some Corian.
http://www.ebay.com/itm/6-Pcs-1-4-x5-x- ... xyVLNSyza8
Either one works fine.
Wayne
I bought this for my first try at candlestone, works great.
http://www.ebay.com/itm/10-Pieces-5-x7- ... SwBLlU5O1e
I also purchased some Corian.
http://www.ebay.com/itm/6-Pcs-1-4-x5-x- ... xyVLNSyza8
Either one works fine.
Wayne
Aspire 8.024, photo vcarve, cnc Shark 60th, control panel 2.1