Brackets...just some simple brackets....

Browse around for inspiration, or share your work to inspire others!

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Brackets...just some simple brackets....

Post by Rando »

A friend commissioned these brackets. They are building a car-racing game simulator setup, what you and I might call a Geek Throne. He's got five "vibration transducers", which are essentially very low frequency speakers without the speaker cones, that shake the chair. HIs original ones were 3D printed plastic, and didn't transmit any of the vibration. These bad boys will get him all the shaking he can handle. All the thicknesses you see are ~3.8", and the brackets are milled out of 1.5 x 3" 6061-T651 Al bar. Took a while on my Shark HD2+, but once you get the cut parameters in line, it all comes out schweet....
With copious amounts of shiny added
With copious amounts of shiny added
The tops are polished, the undersides are as the Shark made them.
The tops are polished, the undersides are as the Shark made them.
With some logo engravings cut and colored
With some logo engravings cut and colored
Thom Randolph
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: Brackets...just some simple brackets....

Post by Rando »

System only allows 3 pictures, and I just couldn't resist one more....
Yes, there were a LOT of chips involved.
Yes, there were a LOT of chips involved.
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

Post Reply