Using the Scan Probe
Posted: Wed May 04, 2011 4:14 pm
CNC Shark Forum
The place to talk about, learn about, and even help teach others about the CNC Shark Routing System
https://www.cncsharktalk.com:443/
Using the Scan Probe
Page 1 of 2
Re: Using the Scan Probe
Posted: Wed May 04, 2011 6:48 pm
Nice video . . . I will have to order a probe soon.
Re: Using the Scan Probe
Posted: Tue Nov 20, 2012 2:05 am
Very interesting. Does the probe have limits on how steep a gradient it can climb? Are there limits on how high it can climb? I assume it will get stuck if it hits a vertical wall. Is that so?
Re: Using the Scan Probe
Posted: Sat Jan 12, 2013 11:42 am
Topher,
I created the video on using the probe.
The probe can actually climb up a vertical face quite easily. Keep in mind that using a pencil point bit cannot create a true vertical surface, there will always be a slight angle based on the angle of the bit itself.
As far as the overall working depth, it would be the Z stroke of your machine minus the length of the probe which is about 2 1/2".
Ralph
I created the video on using the probe.
The probe can actually climb up a vertical face quite easily. Keep in mind that using a pencil point bit cannot create a true vertical surface, there will always be a slight angle based on the angle of the bit itself.
As far as the overall working depth, it would be the Z stroke of your machine minus the length of the probe which is about 2 1/2".
Ralph
Re: Using the Scan Probe
Posted: Sat Jan 12, 2013 1:32 pm
Ralph I went to your website. Did you do the deer scene carving? You must have Aspire now. Great sign. You helped me a lot when I first got my CNC. I do not see you posting on the forum much anymore. Glad to see you still out there.
Bob
Bob
Re: Using the Scan Probe
Posted: Thu Jan 31, 2013 5:38 pm
Bob,
No deer scene carving on my website, and I'm pretty sure I've not done one! Who's website did you visit? LOL
Ralph
No deer scene carving on my website, and I'm pretty sure I've not done one! Who's website did you visit? LOL
Ralph
Re: Using the Scan Probe
Posted: Thu Jan 31, 2013 9:35 pm
Ralph,
It has been a few days. As I remember I clicked on Consultingwoodworker and then http://www.facebook.com/country.wood.cr ... .furniture on the page that came up.
I guess I thaought that was your facebook site. Sorry about that. I am glad you are still out there anyway. I am down here in Manchester about 30 miles from Murfreesboro. Since I got my Shark Pro Plus I now have a Mako and now we have 3 Sharks in our Woodworking Club and another member has a Laguna CNC.
It has been a few days. As I remember I clicked on Consultingwoodworker and then http://www.facebook.com/country.wood.cr ... .furniture on the page that came up.
I guess I thaought that was your facebook site. Sorry about that. I am glad you are still out there anyway. I am down here in Manchester about 30 miles from Murfreesboro. Since I got my Shark Pro Plus I now have a Mako and now we have 3 Sharks in our Woodworking Club and another member has a Laguna CNC.
Re: Using the Scan Probe
Posted: Tue Mar 18, 2014 8:38 pm
Hello every one first let me say I am a new cnc user my cnc will be shipped out by user (cnc is fun) on Thursday brand new Shark pro HD for $3200 with the router included so I will get it next week I am wanting the scan probe but have a ? or two (1st) what format will it save the scan files into can I say scan something on my new Shark then send it to my cheap Chinese cutter witch uses mach3 while I do other work on my Shark. and (2nd) if I say probe or scan an object 1 in tall can I resize it to 3 in tall or the other way around ?.... Thank you Martin 
Re: Using the Scan Probe
Posted: Wed Mar 19, 2014 8:42 pm
Martin,
The scan will be saved as an ".stl" file. The .stl file is a 3D model in the computer. You can scale it up or down in all or any axes.
VCarve does not handle 3D programming but Vectric's Cut 3D program can turn the 3D file into a g-code for the machine. I'm not sure if Mach 3 does or not, but Vectric can tell you if it can output to your machine.
Ralph
The scan will be saved as an ".stl" file. The .stl file is a 3D model in the computer. You can scale it up or down in all or any axes.
VCarve does not handle 3D programming but Vectric's Cut 3D program can turn the 3D file into a g-code for the machine. I'm not sure if Mach 3 does or not, but Vectric can tell you if it can output to your machine.
Ralph
Re: Using the Scan Probe
Posted: Thu Mar 20, 2014 10:52 am
The video doesn't say anything about where to set 0,0,0, before the scan. Do you set it on a corner? At table level?