Water Cooled Spindle Inverter Size

Questions/answers/discussion about initial setup of your CNC Shark

Moderators: sbk, al wolford

Post Reply
Posts: 1
Joined: Wed Sep 02, 2020 4:05 pm

Water Cooled Spindle Inverter Size

Post by joesboat »

Please help with dimensions of 110V 2HP Inverter for water cooled spindle. Also dimensions of HD510 control box. Intend to design cabinet space for both items.

Thank you in advance.

Posts: 2
Joined: Sun Jun 28, 2020 3:25 pm

Re: Water Cooled Spindle Inverter Size

Post by JTA_AUSTEX »

My inverter box is roughly 5w x 7h x 8d, with cabling emerging from the center of the bottom. There are mounting holes for screws on the back corners.
The controller box is roughly 3.6 in high, 11 in wide, and 9.5 deep, but you need to add at least 5 in clearance for connections at front and back.
Hope this helps.

Post Reply