Work Bench/Table for Shark HD4 Extended Bed

Questions/answers/discussion about initial setup of your CNC Shark

Moderators: sbk, al wolford

Work Bench/Table for Shark HD4 Extended Bed

Postby pwg » Thu Jan 04, 2018 6:06 pm

Hi,

I've just purchased a new Shark HD4 Extended Bed and was wondering what others were putting under their CNC Machines. I had originally planned to buy the CNC Table from Rockler, but it does not come in a size large enough to hold the extended bed. What do people recommend? Should I build a work bench like http://www.ana-white.com/2017/04/DIY_fu ... -workbench or is there a commercial solution I should be looking at?

Thanks,
-Phil
pwg
 
Posts: 4
Joined: Wed Jan 03, 2018 7:27 pm

Re: Work Bench/Table for Shark HD4 Extended Bed

Postby parkanrj » Wed Jan 31, 2018 4:31 pm

I built a workbench for storage underneath.
Attachments
4C0F8400-737F-42D4-8369-DB2ABD3C6209.jpeg
Shark HD4 Extended Bed
parkanrj
 
Posts: 1
Joined: Sat Jan 27, 2018 1:30 pm

Re: Work Bench/Table for Shark HD4 Extended Bed

Postby pwg » Thu Feb 08, 2018 2:51 pm

Thanks for the picture! This is remarkably close to what I ended up building. I used the design in my previous post but scaled it up to fit the extended bed. I have thus far been very pleased with the results!

Thanks,
-Phil
pwg
 
Posts: 4
Joined: Wed Jan 03, 2018 7:27 pm


Return to Setting up the Shark

Who is online

Users browsing this forum: Google [Bot] and 2 guests