Page 1 of 1

Double Sided Sticky Tape Sheets

Posted: Thu Oct 25, 2018 10:16 am
by tradewinds
I have a few questions for those of you who use double sided sticky tape.
1. What brand do you use?
2. Where do you purchase it?
3. Have you ever had problems using this method on stock that is 1/8 thick?

Thank you.

Re: Double Sided Sticky Tape Sheets

Posted: Sat Oct 27, 2018 8:47 pm
by basecircle
I use turners tape.Also double sided tape from the dollar store.On the 2in.foam I have used carpet tape.To remove the job from the machine on some of them thin pcs. shoot in some acetone .But not on plastics.A lite puddy knife helpa alot Hope this helps Basecircle

Re: Double Sided Sticky Tape Sheets

Posted: Sun Nov 18, 2018 2:20 pm
by Kayvon
I tried carpenter tape, but wasn't happy with the results, especially on 1/8" stock. Messy, hard to remove, too thick, and compresses a little when pressed.

I've since discovered the method of using (high quality) blue painter tape on both surfaces and superglue between them. Haven't looked back.