Page 1 of 1

DRASTIC Z DEPTHS CHANGES

Posted: Wed Sep 02, 2015 8:48 am
by stephenb79
4 year Shark Pro user. Haven't seen this one yet. Using the pocket clearing option with a Vbit tool path I notice the depth goes from .045" deep to .100" while running the tap file. I E stop it, then hit return to zero. So no spiral cutter drift. It goes back to my preset zero without any depth change. I check the tap file depths and find all lines say .045". Nothing pointing to the extra depth. I lost allot of work pieces and time to the issue. Never a good thing.

Re: DRASTIC Z DEPTHS CHANGES

Posted: Wed Sep 02, 2015 9:25 am
by Mimbler
stephenb79 wrote:4 year Shark Pro user. Haven't seen this one yet. Using the pocket clearing option with a Vbit tool path I notice the depth goes from .045" deep to .100" while running the tap file. I E stop it, then hit return to zero. So no spiral cutter drift. It goes back to my preset zero without any depth change. I check the tap file depths and find all lines say .045". Nothing pointing to the extra depth. I lost allot of work pieces and time to the issue. Never a good thing.
I've heard VCP 8 had some pocketing depth issues in the first revision(s) that has been cured by updating to the latest revision. Don't know if that is your problem or not,
MIke

Re: DRASTIC Z DEPTHS CHANGES

Posted: Thu Sep 03, 2015 10:46 am
by stephenb79
Glad to hear there was an issue. I was losing my mind and shop time over it. I will look for updates to VCP. Thanks for your reply.

Re: DRASTIC Z DEPTHS CHANGES

Posted: Thu Sep 03, 2015 11:36 pm
by Eagle55
I used VCarve Pro 8.0 for a couple of month before realizing there was an update. I didn't notice the Z depth issue but then by coincidence or luck I might not have done what ever action that it was that provoked the issue. For those who might still be wondering, I feel Ver 8.0 is a must have update and well worth what ever the cost you might have to pay in your particular situation. All that coming from someone that just won't hardly ever cut loose with the money for updates and sure won't be in the first few to try it. :)

Roger